- DIN 53516
- DIN ISO 4649: 2002
- ASTM D5963
- DIN 4649
- ISO 4649
ABR 3000 Abrasion
MonTech · Abrasion
The MonTech ABR 3000 abrasion tester is a tear testing instrument for determination of an elastomer's resistance to frictional loss, using a rotating or fixed specimen in accordance with DIN 53516, DIN ISO 4649, AS1683.21 and ASTM D 5963. The test specimen is fixed into a quick clamp sample holder and precisely guided - either with or without rotation - over a predefined distance of either 20 or 40 Meters, with a defined load on a sheet of abrasive paper mounted to a stainless steel rotary drum of 150 mm diameter. Finally, the frictional loss is calculated by comparing the sample weight before and after testing.
Datasheets
- MonTech General Cataloguemontech-product-catalogue-2023.pdfDownload PDF
- MonTech Specimen and Die cuttingmontech-specimen-and-die-cutting-2021.pdfDownload PDF
- ABR 3000 datasheetabrasion-2021.pdfDownload PDF
Specification
| International standards | DIN 53516, DIN ISO 4649:2002 (E), AS1683.21, ASTM D 5963 |
|---|---|
| Contact pressure for specimens expandable up to | N 2.5 5.0 7.5 10.0 N 12.5 15.0 17.5 20.0 |
| Diameter of drum | 150 mm |
| Length of drum | 460 mm |
| Drum speed | 40 min -1 |
| Peripheral speed of drum with abrasion sheet | 0,32 m/s |
| Dimensions of abrasion sheet L/W | 472.5 mm (+2) x 400 mm |
| Film tape W/D | 50 mm x 0.2 mm |
| Abrasion distance of specimen | 40 m (20 m) |
| Corresponds to roller rotations | 84 (42) |
| Angle of inclination of axle center of the specimen to vertical position of thr drum | 3 degree |
| Granulation of abrasion sheet | 60 mesh |
| Specimen diameter | 16 mm |
| Specimen thickness | 6 ... 15 mm |
| Maximum gripping length of specimen | 16 mm |
| Lateral feed of specimen per roller rotation | 4,2 mm |
| Number of revolutions of specimen holder for rotating specimen | 0,9 min -1 |
| Electrical Requirements | 100 - 250 VAC, 50 - 60 Hz, 2 Amps |
| Weight | about 50 kg net |
| Dimensions of abrasion tester W/D/H | 760 x 360 x 320 |
| Description | The test is made on materials which wear off or abrade, e.g. tires, belts, conveyor belts, shoe soles. |
| Basic equipment | Stiff aluminum machine frame with brushless drive system and specimen holder, abrasion drum, metal housing, electric motor for rotation of the drum and the specimen holder |
| Angle of inclination of axle center of the specimen to vertical position of the drum | 3 degree |
| Lateral feed of specimen per drum rotation | 4.2 mm |
| Dimensions (H x W x D) | 370 mm x 760 mm x 430 mm |
| Electrical | 90-250 V, 1 Amp, 47-63 Hz, Single phase |
Model comparison
| Unit | ||||
|---|---|---|---|---|
| N | 2.5 | 5.0 | 7.5 | 10.0 |
| N | 12.5 | 15.0 | 17.5 | 20.0 |
Scroll the table sideways for every column
