- ISO 179-1
Fully-Automated Charpy Impact Tester | 625
Toyo Seiki · Impact
To conduct fully automated Charpy impact testing continuously up to 300 specimens. Once the test specimens are set in the cassette, thickness and remaining width measurement -> setting on the support stand -> impact value measurement -> data processing is fully automated.
Specification
| ISO 179-1 | Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test |
|---|---|
| Model | CHN-3 |
| Testing method | Charpy impact test (Edgewise) |
| Specimen dimensions | Length: 80mm (Note: Tolerance of ±0.5mm required) / Width: 10mm / Thickness: 4mm |
| Power supply | Single-phase, AC100V, 50/60Hz, 3A (or specify) |
| Compressed air | 0.4MPa or more |
| Dimensions | Main unit: W1200 × D750 × H2000mm / Data processing unit: W600 × D700 × H1600mm |
| Weight (Approx.) | Main unit: 220kg / Data processing unit: 45kg |
Model comparison
| Item | Value |
|---|---|
| ISO 179-1 | Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test |
Scroll the table sideways for every column
| Item | Value |
|---|---|
| Model | CHN-3 |
| Testing method | Charpy impact test (Edgewise) |
| Specimen dimensions | Length: 80mm (Note: Tolerance of ±0.5mm required) / Width: 10mm / Thickness: 4mm |
| Power supply | Single-phase, AC100V, 50/60Hz, 3A (or specify) |
| Compressed air | 0.4MPa or more |
| Dimensions | Main unit: W1200 × D750 × H2000mm / Data processing unit: W600 × D700 × H1600mm |
| Weight (Approx.) | Main unit: 220kg / Data processing unit: 45kg |
Scroll the table sideways for every column
