TH
  • JIS K7162-1

Hand Truder | 667

ModelNo. 667

Toyo Seiki · Specimen Preparation

The Hand Truder pelletizes a small amount of samples in interminate from and powder or forms them into small dumbbell test pieces through the replacement of pelletizer with mold equipped to the bottom of heating furnace unit. ■ Molder ■ Pelletizer

Datasheets

Specification

Temperature rangeRT+20 to 400°C
Cylinder∅12 x L130mm (by replacement of the inner cylinder)
Sample capacityMax. 14cm3
Operation of injectionManual (Up-down operation of lever)
Mold (Standard)Small size test piece (JIS K 7162-1BA) etc.
DimensionsW603 x D866 x H1175mm
Mass (Approx.)110kg
Power supplyMain unit: Single-phase, AC100V, 50/60Hz, 1.2kVA / Temp. controller for mold: Single-phase, AC100V, 50/60Hz, 0.5kVA / (or specify)
Cylinder∅20 × L130mm
Sample capacityMax. 40cm3
Size of pelletApprox. ∅2.5 × 2.5mm (Length can be changed)
DimensionsW603 × D866 × H1175mm
Power supplyMain unit: Single-phase, AC100V, 50/60Hz, 1.2kVA / Cleaner: Single-phase, AC100V, 50/60Hz, 0.8kVA / (or specify)

Model comparison

■ Molder
ItemValue
Temperature rangeRT+20 to 400°C
Cylinder∅12 x L130mm (by replacement of the inner cylinder)
Sample capacityMax. 14cm3
Operation of injectionManual (Up-down operation of lever)
Mold (Standard)Small size test piece (JIS K 7162-1BA) etc.
DimensionsW603 x D866 x H1175mm
Mass (Approx.)110kg
Power supplyMain unit: Single-phase, AC100V, 50/60Hz, 1.2kVA / Temp. controller for mold: Single-phase, AC100V, 50/60Hz, 0.5kVA / (or specify)

Scroll the table sideways for every column

■ Pelletizer
ItemValue
Temperature rangeRT+20 to 400°C
Cylinder∅20 × L130mm
Sample capacityMax. 40cm3
Size of pelletApprox. ∅2.5 × 2.5mm (Length can be changed)
DimensionsW603 × D866 × H1175mm
Mass (Approx.)110kg
Power supplyMain unit: Single-phase, AC100V, 50/60Hz, 1.2kVA / Cleaner: Single-phase, AC100V, 50/60Hz, 0.8kVA / (or specify)

Scroll the table sideways for every column

Video