Blow Point Tester | 642

รุ่นNo. 642

Toyo Seiki · Curing Properties / Mooney Viscosity

When a rubber-laden composite material is vulcanized under pressure, bubbles are generated within the material due to insufficient vulcanization in the final phase of the process. The blow point stands for the minimum vulcanization level required for eliminating the existence of these bubbles. To make a product with no bubbles in a shorter time of vulcanization, it is very important to measure the blow point.

ขอใบเสนอราคา

เอกสารดาวน์โหลด

PDFno-642-blow-point-tester-642-cat-eng-20260406-mn.pdfดาวน์โหลด PDF

ข้อมูลจำเพาะ

Model	BP-2
Mold	• 10mm: t=6 to 10mm (tapered), L140×W55mm / • 20mm: t=6 to 20mm (tapered), L140×W55mm / • 30mm: t=6 to 30mm (tapered), L140×W55mm / (To be selected)
Pressurization method	Pneumatic cylinder
Temperature range	RT(+30°C) to 200°C
Heating method	Electric heating
Temperature sensor for control	Pt100Ω ohm, sheath outer diameter 1.6mm
Thermocouple for measurement	T thermocouple, sheath outer diameter 1.2mm, 4 places
PC and testing software	Provided as standard
Electrical	Three-phase, AC200-230V, 50/60Hz, 15A
Compressed air	0.6-0.7MPa
Dimensions	W570 × D800 × H785mm
Weight (approx.)	270kg
Pneumatic specimen cutter	BP-CUT
Hand-lever specimen cutter	CUT
Thermocouple	P/N: 8120009
PTFE bushing	P/N: 1100204

ตารางเปรียบเทียบรุ่น

Specifications

Item	Value
Model	BP-2
Mold	• 10mm: t=6 to 10mm (tapered), L140×W55mm / • 20mm: t=6 to 20mm (tapered), L140×W55mm / • 30mm: t=6 to 30mm (tapered), L140×W55mm / (To be selected)
Pressurization method	Pneumatic cylinder
Temperature range	RT(+30°C) to 200°C
Heating method	Electric heating
Temperature sensor for control	Pt100Ω ohm, sheath outer diameter 1.6mm
Thermocouple for measurement	T thermocouple, sheath outer diameter 1.2mm, 4 places
PC and testing software	Provided as standard
Electrical	Three-phase, AC200-230V, 50/60Hz, 15A
Compressed air	0.6-0.7MPa
Dimensions	W570 × D800 × H785mm
Weight (approx.)	270kg