The CP 3000 Auto is the most efficient way to get your sample preparation and cutting done! Whether for synthetic or natural rubber bales this cutting system is the most efficient solution for sample feeding and preparation.
The laboratory bale cutter CP 3000 provides the most convenient solution to cut and slice polymers bales, blocks and rubber sheets. Fitted with a two-hand safety operation system, optional automatic knife cover and feeding tunnel the unit provides utmost operator convenience meeting highest safety standards.
All cutting dies are available as single, double, triple or multi dies. - Example configuration
MonTech Precision Curing moulds - General Overview and Introduction In our inhouse mould-making shop MonTech manufactures a comprehensive range of precise and durable sample curing moulds according to ISO, DIN, ASTM and GB standards in various different versions. MonTech curing moulds guarantee easy handling and accurate moulding results. The molds are available with single or multiple cavities, h
The LP 3000 1000kN L is a high-capacity floor standing hydraulic laboratory press for high performance curing and preparation of rubber samples. Capable of producing up to 1000kN of compression force, this model is designed in accordance with ISO, ASTM, DIN, GB and other international standards for temperature uniformity, parallelism and safety.
The LP 3000 1000kN is a high-capacity floor standing hydraulic laboratory press for high performance curing and preparation of rubber samples. Capable of producing up to 1000kN of compression force, this model is designed in accordance with ISO, ASTM, DIN, GB and other international standards for temperature uniformity, parallelism and safety. 196 x 196 mm to 596 x 596 mm and maximum press forces of 20 to 150 tons (200 to 1500kN) a matching system is available for almost any application and capacity requirement.
The 1500 kN rubber laboratory press is designed to accommodate larger molds and lighter scale production. Featuring the best insulation, platen parallelism, heat stability and data collection software, the 1500kN press is compliant to the strictest laboratory press standards making it the top-tier press for R&D.
The LP 200kN press is a medium sized benchtop hydraulic laboratory press for high performance curing and preparation of rubber samples. Capable of producing up to 200kN of compression force, this model is designed in accordance with ISO, ASTM, DIN, GB and other international standards for temperature uniformity, parallelism and safety.
The LP 600kN is a high-capacity hydraulic laboratory press for high performance curing and preparation of rubber samples. Capable of producing up to 600kN of compression force, this model is designed in accordance with ISO, ASTM, DIN, GB and other international standards for temperature uniformity, parallelism and safety.
The M-VS 3000 Mooney volumetric sample cutter enables higher accuracy, repeatability and optimized testing results in Mooney Scorch and Viscosity testing by preparing test samples with a constant volume. The M-VS 3000 also features automatic cutting of a center hole for the rotor shaft along with a time delay for compressing.
The tabletop NC 3000 has specifically been designed for slitting samples for tear testing with a precision nick according to the requirements of ISO 34 die B, ISO 34 die C and ASTM D624 die B.
ompression former / arallel cu er ech P- 3000 ompression former Mon ech P- 3000 Para pneumatic sample former for “press to shape” Universal pneumatic sample cutter with large working area and parallel guided crosshead P-VS 3000 Compression former has been specifically designed for pressing The P-VS 3000 Para has been designed for versatile applications to prepare forming of specimens from e.g. pel
ech P- 3000 Mon ech P- 3000 Plus Mon ech P- 3000 trip pneumatic sample High-force pneumatic sample Guillotine strip cutting with larger working area cutter with larger working are arge universal sample cutter arge and strong universal sample cutter trip sample cutter an extended working area to easily handle designed for large format slabs, hard materials and designed for cutting strips and stripe
ech P- 3000 Mon ech P- 3000 Plus Mon ech P- 3000 trip pneumatic sample High-force pneumatic sample Guillotine strip cutting with larger working area cutter with larger working are arge universal sample cutter arge and strong universal sample cutter trip sample cutter an extended working area to easily handle designed for large format slabs, hard materials and designed for cutting strips and stripe
The P-VS 3000 M Lever Press assures constant accuracy and precise cutting results. The cutter can conveniently be used for all types of ASTM, ISO, DIN, JIS cutting dies for all kind of samples made from rubber, leather and paper. It allows easy, quick and convenient sampling with simplified operation.
ompression former / arallel cu er ech P- 3000 ompression former Mon ech P- 3000 Para pneumatic sample former for “press to shape” Universal pneumatic sample cutter with large working area and parallel guided crosshead P-VS 3000 Compression former has been specifically designed for pressing The P-VS 3000 Para has been designed for versatile applications to prepare forming of specimens from e.g. pel
Direct actuated sample cutter for multiple-blade cutting station knives or tough materials requiring high cutting forces. Whenever there is a need to save time and increase productivity by cutting multiple samples at the same time, P-VS 3000 is the ideal sample cutter. Equipped with 2-hand anti-tie down control and completely pneumatic operation, sample cutting is made easy and safe. The cutting f
ech P- 3000 Mon ech P- 3000 Plus Mon ech P- 3000 trip pneumatic sample High-force pneumatic sample Guillotine strip cutting with larger working area cutter with larger working are arge universal sample cutter arge and strong universal sample cutter trip sample cutter an extended working area to easily handle designed for large format slabs, hard materials and designed for cutting strips and stripe
P-VS 3000 Universal sample cutter for fast and precise preparation of sample test specimens for tensile tests and all other DIN, ISO and ASTM standard sample shapes from rubber, elastomers, foam rubber, plastic lms, foils and paper. Any type of cutting knife can be used with the P-VS 3000 sample cutter. Knives can be changed in seconds and cutting height can easily be adjusted.
Universal sample cutter for multiple-blade cutting station knives or tough materials requiring high cutting forces. Whenever there is a need to save time and increase productivity by cutting multiple samples at the same time, P-VS 3000 is the ideal sample cutter.
The R-VS 3000 Rheometer volumetric sample cutter with an all new C-frame design accessibility to the cutting area along with the overall stability of the cutter has been improved.
ech R 3000 Ring cutter special RC 3000 “Ring cutter” version has been designed for the accurate preparation of Ring shaped specimens from cured sheets. Various precision die configurations according to e.g. ISO 37, DIN 53504 and ASTM D 412 are available. RC 3000 is equipped with 3 or 4 cutting stations allowing the echnical specification preparation of two ring samples or a single sample with from
The MonTech VP 3000 and LP 3000 are specifically designed for rubber applications and have evolved into the international standard in laboratory presses in the rubber industry.
The VS 3000 universal constant volume cutter is the ideal and reliable sample preparation tool for applications that require constant volume samples such as preforms for moulding operations. The VS 3000 sample cutter can be tted with knives of any diameter between 20 and 60mm per customer requirements, making the cutter an ideal tool for easy preform preparation.
The laboratory bale cutter CP 3000 provides the most convenient solution to cut and slice polymers bales, blocks and rubber sheets. Fitted with a two-hand safety operation system, optional automatic knife cover and feeding tunnel the unit provides utmost operator convenience meeting highest safety standards.
MonTech rubber lab press series, including the LP 400 kN, features the high performance components for 27/7 curing and preparation of rubber samples. The 400 kN unit is designed in accordance with ISO, ASTM, DIN, GB and other international rubber press standards for unmatched temperature uniformity, parallelism and safety.
This device automatically measures “thickness” and “remaining width” of Charpy/Izod/Tensile impact specimen and transfer and set them to a Pendulum Impact Tester and PC* . (*PC is option)
This device is a ruler for accurately cutting thin sheets such as paper or film to a specifi width. It works by inserting a utility knife into grooves spaced at regular intervals to make the cut.
In order to test the physical properties of pulp, it is necessary to understand the effects of various factors in the preparation of base paper, such as pulp material, pulping conditions, beating method conditions, and filler sizing agents, on the properties of paper, and to prepare samples. This equipment is a manual sheet machine used to estimate these values with a small sample.
Hollow Die Punches for punching test pieces from rubber or soft material sheets. You can choose from the following 3 types. ■ Lever type (No.894) ■ Handle type (No.291) ■ Pneumatic type (No.222) Lever type Press Cutter | 894 Specimen Punching Machine (Handle type) | 291 Specimen Punching Machine (Pneumatic type) | 222
The compact, bench-top Mini Test Press™ is used as a plastic compression machine. The press is equipped with a two-speed manual hydraulic cylinder pressure system. An optional water-cooled, insulated plate sandwich to cold press samples without cooling down platen is also available.
The Plastic Cutting Instrument is used making test specimens of hard plastic materials by cutting and shaving process. The method of cutting employed is the most accurate and very economical and the machine is being widely used for such applications. Specimen is held in a holder of desired size and pushed against the rotating cutter.
When measuring the melt flow rate (MFR and MVR) of powdered or flaky samples in a Melt Flow Indexer, it is recommended in ISO 1133-1 and other standards that the samples be preformed as compressed samples in order to rapidly introduce them into the cylinder and obtain bubble-free extrudate. This equipment heats and compresses powder or flake-shaped sample at a temperature lower than their melting point and forms them into sticks.
The Mini Test Roll (mxing roll) is designed especially for small amount of sample and can be used as a convenient desk-top type. It is also equipped with a safety device.
Medium-sized press machine for compression molding plastic and rubber. [P2-30T] The heating and cooling plates are independent, allowing the heating plate to maintain a constant temperature. This means that there is no need to wait for the machine to reheat and the work cycle can be significantly reduced.
The Hand Truder pelletizes a small amount of samples in interminate from and powder or forms them into small dumbbell test pieces through the replacement of pelletizer with mold equipped to the bottom of heating furnace unit. ■ Molder ■ Pelletizer
In order to permit reliable sample formation not possible with conventional machine, the Fine Labo Press, incorporates automatic deforming operation and a mechanism for cooling at constant rate by controlling the flow of cooling water to control the cooling rate. Related standards
● Replaceable. ● High elasticity sponge rubber ejector. ● Safety, because blade is covered with ejector sponge.
The Notching Tool A-4 series are miniature, computerized numerically controlled milling machine for preparing a variety of notched specimen bars. All operations except mounting and dismounting of the specimens are automatic. Notch cutter (Milling cutter) Slice cutter (A-4 only) Other options *A-4 only Ordering Information
